Open the Magic Elf Moving Gloves Design Space File and make sure your machine is plugged in and connected to your computer (or via bluetooth).
At this time resize the design to fit your Gloves! Once sized correctly, hit 'MAKE IT' in the top right hand corner.
Because you'r going to be cutting the design from SportFlex Iron On, you'll need to mirror the image at this time. Verify the preview shows the design mirrored. I also like to space the two words a little more. Once done, hit 'CONTINUE' in the bottom right hand corner.
Choose your machine from the drop down menu. Then set your material to SportFlex Iron On.
Apply the SportFlex Iron onto your Standard Matshiny side down! Then load the mat into your machine. Hit the 'C' button on your machine when it starts flashing.
After the design has cut, use scissors to trim around the design, cut the words apart and weed the excess vinyl from around your design using your weeding tool.
Place your gloves on top of the EasyPress Mat. Then place your weeded design onto the gloves where you want it to be. Look up your EasyPress Mini temperature on the EasyPress Heat Settings Guide. At this time, it instructed me to apply the SportFlex Iron On onto the gloves on Medium Heat for 30 seconds.
After the head is applied, allow it to cool completely, before you carefully cold peel the plastic sheet of the the design. The Heat Settings Guide did instruct me to Warm Peel the design, but I found allowing it to cool down more worked better.