This Back to School Sanitation Kit and Personalized Kids Tumbler are both must-haves for kids to return to school this year! Just personalize a storage container and tumbler with these simple vinyl labels made with the Cricut Joy in minutes!
Open the Design Space File linked within the blog post.
At this time go ahead and amend the size of the sanitation label to fit the container you're planning on using. If you are also going to make the tumbler, then go ahead and amend the name and resize it to fit your tumbler. At this time, you can also add or remove anything to either of the designs that you'd like! After you've made any changes to the design(s), hit 'MAKE IT' in the top right-hand corner.
A popup will appear that will have you select how you will load your material into your machine. Select the one that applies.
When your cut preview loads, verify that everything is placed well. You can move items if needed.Once you've done that, hit 'continue' in the bottom right-hand corner.
Select your machine from the drop-down menu and set your material to the type of vinyl you plan on using.I chose to use a Premium Permanent Vinyl on the tumbler and Removable Vinyl to the Sanitation Kit.
Use your True Control Knife on your Self Healing Mat to cut your Smart Vinyl to the length that you need or you can load a long roll of Smart Vinyl into your machine and cut it after your design is finished cutting.
When it's done cutting, it will prompt you on your computer screen to unload the vinyl.
Weed the excess vinyl from around your design(s).
Next, apply Transfer Tape to your weeded designs.
When you're ready to apply the designs, carefully peel the backing off of your design. Make sure the design is transferring to the transfer tape and not sticking onto the vinyl backing!
Place the design onto your plastic container and/or tumbler!Apply a lot of pressure onto the design using your fingers to ensure it is applied well to the container or tumbler.
Repeat this process on your vinyl tumbler if you're making one.
Notes
Allow the design to adhere for at least 24 hours prior to washing.