Open up either the Warrior Queen or Teacher Mode Design Space File. At this time go ahead and resize the design to be the size you want.
Once the file is sized the way you want it, hit 'Make It' in the top right hand corner. Verify that the file is laid out on the mat correct, hit Mirror and then hit 'continue' in the bottom right hand corner of the screen.
Choose your machine from the drop down menu and select your material to 'Infusible Ink.'
I've also found that weeding Infusible Ink is WAY easier when I adjust the pressure to MORE!
Once the machine is done cutting, then go ahead and weed the infusible ink (see additional tips below).
Heat your EasyPress or EasyPress 2 to Cricut's recommended heat setting. Always go to the EasyPress Heat Settings website to confirm the heat temperature recommended.
At this time it's stating to heat your EasyPress 2 to 385 degrees Fahrenheit and apply heat to your design for 40 seconds. Make sure to place the contact paper that came in the Infusible Ink Sheets Box between the EasyPress and your design! It also states that on the Tote Bag to Warm Peel.
After the 40 seconds, give it like 5-10 seconds and then go ahead and remove the transfer tape and viola! It's done!